Forklift safety inspection checklist is essential to ensure the safe operation of machinery and prevent workplace accidents. Implementing a forklift safety inspection checklist facilitates the identification of potential hazards and ensures safety standards compliance. Before using the forklift, it is essential to conduct daily inspections to ensure that everything is operating properly.
Forklift Safety Inspection Checklist points:
Forklift Make & Model : Date and time of Inspection : Identification Number : Forklift Operator Details : Due date of Inspection : Owned/Hired/Contractor :
SN
Details
1
Forklift should be free from structural or mechanical Damage.
2
Free from damage in tyres (cuts, cracks, ware & tare etc.)
3
Battery shall be in good condition and free from excess corrosion.
4
Secure battery cables, insulated properly and in good condition.
5
Forklift shall be free from any fluid leaks.
6
Forklift fluid levels should be at appropriate level.
7
Forks should be in condition (For e.g. not bent, worn, tear, cracks, damaged, etc.)
8
LPG cylinder should be free from damage or defects, relief valve should be pointed up.
9
Presence of LPG cylinder bracket and in good condition.
10
Fork positioning latches should be in good condition, without any wear and tear.
11
Sprocket teeth and chain anchor pins in good condition, without chipped, worn or bent.
12
Hydraulic parts should be in good condition, free from leaks, wear and tear.
13
Presence of seat belt, available in good condition and working properly.
14
Presence of overhead guards and in good condition.
15
Data Plate should be present and legible, all approved attachments listed on the data plate.
16
Head lights, tail lights and indicators are in working condition.
17
Side mirrors should be in good condition.
18
Front, Reverse, Swing horn and back up alarm should be in working condition.
19
All control panel lights and gauges are in working condition.
20
Lift mechanism work smoothly (raise and lower forks without load).
Safety inspection checklist for forklift parts, including forks, mast, tires, and brakes, to ensure proper functioning and workplace safety.
21
Tilt mechanism work smoothly (tilt the mast forward and back without load).
22
Hydraulic controls return to the neutral position when released.
23
Steering mechanism working smoothly without any jam or hard.
24
All beaks should be in working condition and hold forklift at place when not in use.
25
Forklift should be free from any unusual sounds or operational defects.
26
Safe Work Load (SWL) Marked and visible.
27
Regular inspection of forklift as per plan.
28
Fire Extinguisher available( in good condition, pressure within range).
29
Operator have valid and suitable license as per legal requirement.
